Home

< Previous   Next >

2008 - MX-5 - Transmission/Transaxle

OIL SEAL (OIL PUMP) REPLACEMENT [SJ6A-EL]

1. Remove the automatic transmission. (See AUTOMATIC TRANSMISSION REMOVAL/INSTALLATION [SJ6A-EL].)

CAUTION:

2. Remove the torque converter. (See TORQUE CONVERTER REMOVAL/INSTALLATION [SJ6A-EL].)

CAUTION:

3. Remove the oil seal from the oil pump body using the SST.

4. Using the SST and a hammer, install the new oil seal to the oil pump body.

5. Coat the lip of the oil seal with grease.
6. Install the torque converter. (See TORQUE CONVERTER REMOVAL/INSTALLATION [SJ6A-EL].)
7. Install the automatic transmission. (See AUTOMATIC TRANSMISSION REMOVAL/INSTALLATION [SJ6A-EL].)
8. Perform the mechanical system test. (See MECHANICAL SYSTEM TEST [SJ6A-EL].)


< Previous   Next >
Back to Top
© 2009 Mazda North American Operations, U.S.A.