Home

< Previous   Next >

2008 - MX-5 - Transmission/Transaxle

AUTOMATIC TRANSMISSION FLUID (ATF) REPLACEMENT [SJ6A-EL]

WARNING:

NOTE:

1. Remove the drain plug and the drain plug gasket from the oil pan.

2. Drain the ATF into a container.
3. Clean the drain plug.

CAUTION:

4. Install a new drain plug gasket and the drain plug to the oil pan.

NOTE:

5. Remove the overflow plug and the overflow plug gasket.

6. Remove the filler plug and the O-ring.

7. Add the specified type of ATF through the filler plug hole.
8. Verify the ATF is dripping from the overflow orifice.

CAUTION:

9. Install a new overflow plug gasket and the overflow plug.

NOTE:

10. Coat a new O-ring with ATF, and install it to the filler plug.

CAUTION:

11. Adjust the ATF level. (See AUTOMATIC TRANSMISSION FLUID (ATF) LEVEL ADJUSTMENT [SJ6A-EL].)


< Previous   Next >
Back to Top
© 2009 Mazda North American Operations, U.S.A.