Home

< Previous   Next >

2008 - MX-5 - Transmission/Transaxle

VEHICLE SPEED SENSOR (VSS) REMOVAL/INSTALLATION [P66M-D]

CAUTION:

1. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION[LF].)
2. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION[LF].)
3. Disconnect the VSS connector.
4. Remove the transmission. (See TRANSMISSION REMOVAL/INSTALLATION[P66M-D].)
5. Remove the VSS.

6. Apply the specified oil to a new O‐ring and install it on a new VSS.
7. Install the VSS.

8. Install the transmission. (See TRANSMISSION REMOVAL/INSTALLATION[P66M-D].)
9. Connect the VSS connector.
10. Connect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION[LF].)
11. Install the battery cover. (See BATTERY REMOVAL/INSTALLATION[LF].)


< Previous   Next >
Back to Top
© 2009 Mazda North American Operations, U.S.A.