Home

< Previous   Next >

2008 - MX-5 - Transmission/Transaxle

TRANSMISSION OIL REPLACEMENT [M15M-D]

1. Position the vehicle on level ground.
2. Remove the drain plug B with washer.

3. Drain the oil into a container.
4. Wipe the drain plug B clean and apply sealant to the drain plug B threads before installing.
5. Install the drain plug B with new washer.
6. Remove the check plug A.

7. Add the specified oil from check plug A port until the level reaches the brim of check plug hole.
8. Install the new check plug A.



< Previous   Next >
Back to Top
© 2009 Mazda North American Operations, U.S.A.