Home

< Previous   Next >

2008 - MX-5 - Transmission/Transaxle

CLUTCH MASTER CYLINDER REMOVAL/INSTALLATION

CAUTION:

1. Remove in the order indicated in the table.
2. Install in the reverse order of removal.
3. Bleed the air from the system.

(See CLUTCH FLUID REPLACEMENT.)

4. Inspect and adjust the clutch pedal.

(See CLUTCH PEDAL INSPECTION/ADJUSTMENT.)



1

Hose clip

2

Clutch pipe

3

Nut

4

Clutch master cylinder

5

Packing




< Previous   Next >
Back to Top
© 2009 Mazda North American Operations, U.S.A.