Home

< Previous   Next >

2008 - MX-5 - Transmission/Transaxle

CLUTCH DISC INSPECTION

1. Remove the clutch disc.
2. Inspect the lining surface for discoloration and grease/oil contamination.
3. Inspect the torsion spring for weakness and the rivet for looseness.
4. Using a vernier caliper, measure the depth between the lining surface and the rivet head.

5. Measure the clutch disc runout using a dial gauge.

6. Install the clutch disc.


< Previous   Next >
Back to Top
© 2009 Mazda North American Operations, U.S.A.