Home

< Previous   Next >

2008 - MX-5 - Brakes

COMBINED SENSOR INITIALIZATION PROCEDURE

WARNING:

1. Inspect the wheel alignment and inflation pressure.
2. Park the vehicle on level ground.
3. Turn the ignition switch off.
4. Connect the M-MDS to the DLC-2.

5. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
6. Perform the initialization procedure according to the directions on the screen.
7. Drive the vehicle forward.
8. After 5 min of driving, verify that the DSC system is normal.


< Previous   Next >
Back to Top
© 2012 Mazda North American Operations, U.S.A.