Home

< Previous   Next >

2008 - MX-5 - Brakes

COMBINED SENSOR INSPECTION

1. Turn the ignition switch off.
2. Connect the M-MDS to the DLC-2.

3. Select the following PIDs, then inspect the lateral acceleration speed and the yaw rate.
a. Lateral acceleration speed inspection
i. Verify the LAT_ACCL change when the combined sensor is tilted to the left and right.

  • If there is any malfunction, replace the combined sensor.

    Standard
  • When the sensor is tilted to the right (A):

    LAT_ACCL changes negatively.

  • When the sensor is tilted to the left (B):

    LAT_ACCL changes positively.

b. Yaw rate inspection
i. Verify the YAW_RATE change when the combined sensor is rotated to the left and right.

  • If there is any malfunction, replace the combined sensor.

    Standard
  • When the sensor is rotated to the right (A):

    YAW_RATE changes negatively.

  • When the sensor is rotated to the left (B):

    YAW_RATE changes positively.



< Previous   Next >
Back to Top
© 2012 Mazda North American Operations, U.S.A.