Home

< Previous   Next >

2008 - MX-5 - Brakes

COMBINED SENSOR REMOVAL/INSTALLATION

CAUTION:

1. Remove the console. (See CONSOLE REMOVAL/INSTALLATION.)
2. Remove in the order indicated in the table.



1

Combined sensor connector

2

Nut

3

Combined sensor

4

Bracket


3. Install in the reverse order of removal.
4. After installation, perform the combined sensor initialization procedure. (See COMBINED SENSOR INITIALIZATION PROCEDURE.)


< Previous   Next >
Back to Top
© 2012 Mazda North American Operations, U.S.A.