Home

< Previous   Next >

2008 - MX-5 - Brakes

CALIPER (FRONT) DISASSEMBLY/ASSEMBLY

1. Disassemble in the order indicated in the table.



1

Bleeder cap

2

Bleeder screw

3

Bolt

4

Sleeve

5

Piston

(See Piston Disassembly Note.)

6

Dust seal

7

Piston seal

8

Caliper body


2. Assemble in the reverse order of disassembly.

Piston Disassembly Note

CAUTION:

1. Insert a piece of wood in the caliper as shown in the figure, and then blow compressed air through the bleeder screw hole to remove the piston from the caliper body.



< Previous   Next >
Back to Top
© 2012 Mazda North American Operations, U.S.A.