Home

< Previous   Next >

2008 - MX-5 - Brakes

DISC PAD (REAR) REPLACEMENT

1. Remove in the order indicated in the table.
2. Install in the reverse order of removal.
3. After installation, depress the brake pedal a few times, and inspect the following.



1

Parking brake cable

(See REAR BRAKE (DISC) REMOVAL/INSTALLATION.)

2

Bolt

3

Caliper

(See Caliper Installation Note.)

4

Disc pad

5

Shim

6

Guide plate


Caliper Installation Note

1. Clean the exposed area of the piston.
2. Rotate the piston clockwise slowly using the SST and push in the piston completely until the piston grooves are in the position shown in the figure.

3. Install the caliper.


< Previous   Next >
Back to Top
© 2012 Mazda North American Operations, U.S.A.