Home

< Previous   Next >

2008 - MX-5 - DriveLine/Axle

DIFFERENTIAL OIL INSPECTION

1. Park the vehicle on level ground for approx. 5 min. to stabilize the differential oil.
2. Remove the oil-fill plug and the washer.

3. Inspect if the oil level is close to the rim of the oil-fill hole.

NOTE:

4. If the oil level is lower than approx. 12 mm {0.47 in} from the lower end of the oil-fill plug hole, inspect for oil leakage and add the specified oil.
5. Install the oil-fill plug with a new washer and tighten.


< Previous   Next >
Back to Top
© 2009 Mazda North American Operations, U.S.A.