Home

< Previous   Next >

2008 - MX-5 - Suspension

FRONT SHOCK ABSORBER DISPOSAL

WARNING:

1. Clamp the shock absorber on a flat surface.
2. Drill a 2—3 mm {0.08—0.12 in} hole at a point 25 mm {0.98 in} from the bottom of the tube, so that the gas can escape.

3. Turn the hole downwards.
4. The oil can be collected by moving the piston rod several times up and down and cutting the tube at the end.
5. Dispose of waste oil according to local waste disposal law.

NOTE:



< Previous   Next >
Back to Top
© 2009 Mazda North American Operations, U.S.A.