Home

< Previous   Next >

2008 - MX-5 - Suspension

WHEEL UNIT ID REGISTRATION

NOTE:

Using M-MDS

1. After the vehicle is identified, select the following items from the initial screen of the M-MDS.

CAUTION:

NOTE:

2. Leave the vehicle with the engine off for 15 min or more.
3. Verify that the TPMS warning light turns on and off in 0.5 s cycles repeatedly.
4. Drive the vehicle at a speed of 25 km/h {15.5 mph} or more for 10 min to implement the wheel unit ID registration.

NOTE:

5. Verify that the TPMS warning light turns off.

NOTE:

Without Using M-MDS

1. Turn the ignition switch to the ON position, then turn it off.
2. Leave the vehicle with the engine off for 15 min or more.
3. Drive the vehicle at a speed of 25 km/h {15.5 mph} or more for 10 min or more.
4. After driving for 10 min, verify that the TPMS warning light does not flash and is not illuminated.


< Previous   Next >
Back to Top
© 2009 Mazda North American Operations, U.S.A.