Home

< Previous   Next >

2008 - MX-5 - Suspension

MALFUNCTIONING WHEEL UNIT IDENTIFICATION

NOTE:

1. Adjust the air pressure as follows:
2. Turn the ignition switch off.
3. Connect the M-MDS to the DLC-2.
4. Turn the ignition switch to the ON position.
5. Drive the vehicle at a speed of 25 km/h {15.5 mph} or more for 2 min or more.
6. Select the following PIDs using the M-MDS, and monitor them.
7. Determine which wheel unit identification code matches which wheel and tire by comparing the PID monitor values with the air pressure values set in Step 1.

8. Select the ID_LAST PID using the M-MDS, and take a note of four displayed identification codes.
9. Inspect the DTCs using the M-MDS.


< Previous   Next >
Back to Top
© 2009 Mazda North American Operations, U.S.A.