Home

< Previous   Next >

2008 - MX-5 - Engine

POWER STEERING PRESSURE (PSP) SWITCH INSPECTION [LF]

NOTE:

Continuity Inspection

1. Inspect the following items:
2. Disconnect the PSP switch connector.
3. Start the engine.
4. Verify that the continuity between PSP switch terminal A and body ground is as indicated in the table.

Circuit Open/Short Inspection

1. Disconnect the PCM connector. (See PCM REMOVAL/INSTALLATION [LF].)
2. Inspect the following wiring harness for open or short circuit (continuity Inspection).

Open circuit
Short circuit


< Previous   Next >
Back to Top
© 2012 Mazda North American Operations, U.S.A.