Home

< Previous   Next >

2008 - MX-5 - Engine

KNOCK SENSOR (KS) REMOVAL/INSTALLATION [LF]

1. Remove the battery cover.
2. Remove the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [LF].)
3. Remove the dynamic chamber. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [LF].)
4. Disconnect the KS connector.
5. Remove the KS installation bolt, then remove the KS.

6. Install in the reverse order of removal.


< Previous   Next >
Back to Top
© 2012 Mazda North American Operations, U.S.A.