Home

< Previous   Next >

2008 - MX-5 - Engine

KNOCK SENSOR (KS) INSPECTION [LF]

NOTE:

Resistance Inspection

1. Remove the battery cover.
2. Remove the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [LF].)
3. Disconnect the KS connector.
4. Measure resistance between KS terminals A and B.

Circuit Open/Short Inspection

1. Disconnect the PCM connector.
2. Inspect the following wiring harnesses for an open or short circuit. (Continuity inspection)
Open circuit
Short circuit


< Previous   Next >
Back to Top
© 2012 Mazda North American Operations, U.S.A.