Home

< Previous   Next >

2008 - MX-5 - Engine

CAMSHAFT POSITION (CMP) SENSOR REMOVAL/INSTALLATION [LF]

1. Remove the battery cover.
2. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [LF].)

CAUTION:

3. Disconnect the CMP sensor connector.

4. Remove the CMP sensor installation bolt.
5. Remove the CMP sensor from the cylinder head cover.
6. Install in the reverse order of removal.


< Previous   Next >
Back to Top
© 2012 Mazda North American Operations, U.S.A.