Home

< Previous   Next >

2008 - MX-5 - Engine

MASS AIR FLOW (MAF) SENSOR INSPECTION [LF]

NOTE:

1. Verify the connection condition of the MAF sensor/IAT sensor connector.
2. Verify the MAF sensor voltage under no airflow conditions using the following procedure:
3. Remove the MAF/IAT sensor. (See MASS AIR FLOW (MAF)/INTAKE AIR TEMPERATURE (IAT) SENSOR REMOVAL/INSTALLATION [LF].)
4. Verify that there is no foreign matter in the MAF/IAT sensor.

5. Verify that there is no damage, cracks, or dirt on the MAF sensor part of the MAD/IAT sensor.

NOTE:

6. Install the MAF/IAT sensor. (See MASS AIR FLOW (MAF)/INTAKE AIR TEMPERATURE (IAT) SENSOR REMOVAL/INSTALLATION [LF].)


< Previous   Next >
Back to Top
© 2012 Mazda North American Operations, U.S.A.