Home

< Previous   Next >

2008 - MX-5 - Engine

CRUISE CONTROL SWITCH INSPECTION [LF]

1. Disconnect the negative battery cable.
2. Remove the driverā€side air bag module. (See DRIVER-SIDE AIR BAG MODULE REMOVAL/INSTALLATION.)
3. Disconnect the audio control switch connector. (See AUDIO CONTROL SWITCH REMOVAL/INSTALLATION.)
4. Inspect for resistance and continuity between cruise control switch terminals B—C using a tester.



Switch condition

Resistance (ohm)

ON OFF button pressed

Continuity

CANCEL button pressed

117—123

SET/- button pressed

666—694

RES/+ button pressed

2,156—2,244

No button pressed

No continuity




< Previous   Next >
Back to Top
© 2012 Mazda North American Operations, U.S.A.