Home

< Previous   Next >

2008 - MX-5 - Engine

STARTER INTERLOCK SWITCH INSPECTION [LF]

CAUTION:

  1. Do not reuse the starter interlock switch if it is removed from the vehicle even once. Replace with a new starter interlock switch when installing.

1. Remove the battery cover.
2. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [LF].)
3. Disconnect the starter interlock switch connector.
4. Verify that the continuity is as indicated in the table using a tester.



< Previous   Next >
Back to Top
© 2012 Mazda North American Operations, U.S.A.