Home

< Previous   Next >

2008 - MX-5 - Engine

SPARK PLUG REMOVAL/INSTALLATION [LF]

CAUTION:

1. Remove the battery cover.
2. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [LF].)
3. Remove the plug hole plate. (See PLUG HOLE PLATE REMOVAL/INSTALLATION [LF].)
4. Remove the front suspension tower bar (joint). (See FRONT SUSPENSION TOWER BAR REMOVAL/INSTALLATION.)
5. Remove the ignition coils. (See IGNITION COIL REMOVAL/INSTALLATION [LF].)
6. Remove the spark plugs using a plug-wrench.
7. Install in the reverse order of removal.


< Previous   Next >
Back to Top
© 2012 Mazda North American Operations, U.S.A.