Home

< Previous   Next >

2008 - MX-5 - Engine

GENERATOR REMOVAL/INSTALLATION [LF]

WARNING:

CAUTION:

1. Remove the battery and battery tray. (See BATTERY REMOVAL/INSTALLATION [LF].)
2. Remove the drive belt. (See DRIVE BELT REPLACEMENT [LF].)
3. Remove in the order indicated in the table.
4. Install in the reverse order of removal.



1

P/S pressure hose bracket

2

Generator bracket

3

Generator duct

4

B terminal cable

5

Generator connector

6

Generator

(See GENERATOR REMOVAL/INSTALLATION [LF].)


Generator Installation Note

1. Tighten bolt A temporarily.
2. Tighten bolt B, C to the specified tightening torque.
3. Tighten bolt A to the specified tightening torque.


< Previous   Next >
Back to Top
© 2012 Mazda North American Operations, U.S.A.