Home

< Previous   Next >

2008 - MX-5 - Engine

VARIABLE TUMBLE SOLENOID VALVE REMOVAL/INSTALLATION [LF]

AT

1. Remove the plug hole plate. (See PLUG HOLE PLATE REMOVAL/INSTALLATION [LF].)
2. Remove the battery cover.
3. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [LF].)
4. Remove in the order indicated in the table.
5. Install in the reverse order of removal.



1

Connector

2

Vacuum hose

3

Variable tumble solenoid valve




< Previous   Next >
Back to Top
© 2012 Mazda North American Operations, U.S.A.