Home

< Previous   Next >

2008 - MX-5 - Engine

VARIABLE TUMBLE SOLENOID VALVE INSPECTION [LF]

AT

NOTE:

Airflow Inspection
1. Remove the battery cover.
2. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [LF].)
3. Remove the variable tumble solenoid valve. (See VARIABLE TUMBLE SOLENOID VALVE REMOVAL/INSTALLATION [LF].)
4. Inspect airflow between the ports under the following conditions.

Circuit Open/Short Inspection
1. Disconnect the PCM connector. (See PCM REMOVAL/INSTALLATION [LF].)
2. Inspect the following wiring harness for open or short (continuity check).



< Previous   Next >
Back to Top
© 2012 Mazda North American Operations, U.S.A.