Home

< Previous   Next >

2008 - MX-5 - Engine

OIL FILTER REPLACEMENT [LF]

WARNING:

CAUTION:

1. Remove the oil filter using a commercially available, cup-type oil filter wrench (76 mm {3.0 in} diameter, 15 sided).

2. Use a clean rag to wipe off the mounting surface.
3. Apply clean engine oil to the gasket of a new oil filter.
4. Tighten the oil filter using a cup-type oil filter wrench and according to the instruction on the package or side of the oil filter.
5. Start the engine and confirm that there is no oil leakage.
6. Inspect the oil level. (See ENGINE OIL LEVEL INSPECTION [LF].)


< Previous   Next >
Back to Top
© 2012 Mazda North American Operations, U.S.A.