Home

< Previous   Next >

2008 - MX-5 - Engine

DRIVE BELT REPLACEMENT [LF]

1. Remove the battery and battery tray. (See BATTERY REMOVAL/INSTALLATION [LF].)
2. Rotate the drive belt auto tensioner in the direction shown in the figure and remove the drive belt.

3. Install a new drive belt.

NOTE:

4. Verify that the drive belt auto tensioner indicator mark does not exceed the limit. (See DRIVE BELT INSPECTION [LF].)
5. Install the battery and battery tray. (See BATTERY REMOVAL/INSTALLATION [LF].)


< Previous   Next >
Back to Top
© 2012 Mazda North American Operations, U.S.A.