Home

< Previous   Next >

2008 - MX-5 - Engine

OIL CONTROL VALVE (OCV) REMOVAL/INSTALLATION [LF]

1. Remove the battery cover.
2. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [LF].)
3. Remove the plug hole plate. (See PLUG HOLE PLATE REMOVAL/INSTALLATION [LF].)
4. Remove the ignition coils. (See IGNITION COIL REMOVAL/INSTALLATION [LF].)
5. Remove the CMP sensor. (See CAMSHAFT POSITION (CMP) SENSOR REMOVAL/INSTALLATION [LF].)
6. Remove the OCV connector.
7. Remove the ventilation hose. (See QUICK RELEASE CONNECTOR (EMISSION SYSTEM) REMOVAL/INSTALLATION [LF].)
8. Remove the cylinder head cover. (See TIMING CHAIN REMOVAL/INSTALLATION [LF].)
9. Remove in the order indicated in the table.
10. Install in the reverse order of removal.



1

OCV




< Previous   Next >
Back to Top
© 2012 Mazda North American Operations, U.S.A.