Home

< Previous   Next >

2008 - MX-5 - Engine

ENGINE DISASSEMBLY/ASSEMBLY [LF]

1. Remove the transmission from the engine. (See TRANSMISSION REMOVAL/INSTALLATION [M15M-D].)(See TRANSMISSION REMOVAL/INSTALLATION [P66M-D].) (See AUTOMATIC TRANSMISSION REMOVAL/INSTALLATION [SJ6A-EL].)
2. Remove the following parts:
a. The clutch unit (MT) (See CLUTCH UNIT REMOVAL/INSTALLATION.)
b. The ignition coil (See IGNITION COIL REMOVAL/INSTALLATION [LF].)
c. The CMP sensor (See CAMSHAFT POSITION (CMP) SENSOR REMOVAL/INSTALLATION [LF].)
d. The power steering oil pump (See POWER STEERING OIL PUMP REMOVAL/INSTALLATION.)
e. The fuel distributor and fuel injector (See FUEL INJECTOR REMOVAL/INSTALLATION [LF].)
f. The intake-air system (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [LF].)
g. The exhaust system (See EXHAUST SYSTEM REMOVAL/INSTALLATION [LF].)
h. The CKP sensor (See CRANKSHAFT POSITION (CKP) SENSOR REMOVAL/INSTALLATION [LF].)
3. Remove in the order indicated in the table.
4. Install in the reverse order of removal.



1

Drive belt auto tensioner




< Previous   Next >
Back to Top
© 2012 Mazda North American Operations, U.S.A.