Home

< Previous   Next >

2008 - MX-5 - Engine

KOEO/KOER SELF TEST [LF]

NOTE:

1. Connect the M-MDS to the DLC‐2.

2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
3. Then, select the “KOEO On Demand Self Test” or “KOER On Demand Self Test” and perform procedures according to directions on the M-MDS screen.
4. Verify the DTC according to the directions on the M-MDS screen.
5. After completion of repairs, clear all DTCs stored in the PCM, while referring to “AFTER REPAIR PROCEDURE“.


< Previous   Next >
Back to Top
© 2012 Mazda North American Operations, U.S.A.