Home

< Previous   Next >

2008 - MX-5 - General Information

ELECTRICAL SYSTEM

Electrical Parts

Battery cable

Wiring Harness

CAUTION:

Connectors

Disconnecting connectors
Locking connector
Inspection

CAUTION:

Terminals

Inspection
Replacement

Sensors, Switches, and Relays

Wiring Harness

Wiring color codes


CODE

COLOR

CODE

COLOR

B

Black

O

Orange

BR

Brown

P

Pink

G

Green

R

Red

GY

Gray

V

Violet

L

Blue

W

White

LB

Light Blue

Y

Yellow

LG

Light Green


Fuse

Replacement

Direction of View for Connector

Part-side connector

The viewing direction of part-side connectors is from the terminal side.

*
Part names are shown only when there are multiple connector drawings.
Vehicle harness-side connector

The viewing direction of vehicle harness-side connectors is from the harness side.

*
Part names are shown only when there are multiple connector drawings.
Other

When it is necessary to show the terminal side of vehicle harness-side connectors, such as the following connectors, the viewing direction is from the terminal side.

Electrical Troubleshooting Tools

Jumper wire

CAUTION:

Voltmeter
Ohmmeter

CAUTION:

Precautions Before Welding

A vehicle has various electrical parts. To protect the parts from excessive current generated when welding, be sure to perform the following procedure.

1. Turn the ignition switch to the LOCK position.
2. Disconnect the battery cables.

3. Securely connect the welding machine ground near the welding area.

4. Cover the peripheral parts of the welding area to protect them from weld spatter.


< Previous   Next >
Back to Top
© 2009 Mazda North American Operations, U.S.A.